Click + symbol then Start Test button to use the demos
Demo – 2382-18 Practice Test
Test Summary
0 of 60 Questions completed
Questions:
Information
You have already completed the test before. Hence you can not start it again.
Test is loading…
You must sign in or sign up to start the test.
You must first complete the following:
Results
Results
0 of 60 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Appendices 0%
- Assessment of general characteristics 0%
- Definitions 0%
- Inspection and Testing 0%
- Protection for safety 0%
- Scope, Object and Fundamental Principles 0%
- Selection and erection of equipment 0%
- Special Installations or Locations 0%
-
————————————————————–
Thank you for taking a look at this Electacourse Practice Test. There are many more questions in the actual practice tests we have available. For instance the 18th Edition Online Course contains over 1,000 questions. Each time you take an actual test you will see a different set of questions.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- Current
- Review
- Answered
- Correct
- Incorrect – Reference:
Exam Practice 2391 Inspection & Testing Multiple Choice Questions. This short demo has 20 questions to be completed in 1 hour. If you do the demo more than once, you will see the same questions.
Test Summary
0 of 20 Questions completed
Questions:
Information
You have already completed the test before. Hence you can not start it again.
Test is loading…
You must sign in or sign up to start the test.
You must first complete the following:
Results
Results
0 of 20 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- 4. Understand the requirements for testing electrical installations during periodic inspection and test 0%
- Understand safety management procedures when undertaking inspection and testing 0%
- Understand the requirements for inspection and testing 0%
- Understand the requirements for testing electrical installations 0%
- Understand the requirements for the inspection of electrical installations 0%
-
————————————————————–
Thank you for taking a look at this Electacourse Practice Test. There are many more questions in the actual practice tests we have available. For instance the 18th Edition Online Course contains over 1,000 questions. Each time you take an actual test you will see a different set of questions.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- Current
- Review
- Answered
- Correct
- Incorrect – Reference:
There are 9 question in this demo. The actual test draws 30 question randomly from the database of about 300 questions each time you practice.
This test is not automatically marked. You can compare your answers to the model answers to make a self-assessment of your performance.
Test Summary
0 of 9 Questions completed
Questions:
Information
You have already completed the test before. Hence you can not start it again.
Test is loading…
You must sign in or sign up to start the test.
You must first complete the following:
Results
Results
0 of 9 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
————————————————————–
Thank you for taking a look at this Electacourse Practice Test. There are many more questions in the actual practice tests we have available. For instance the 18th Edition Online Course contains over 1,000 questions. Each time you take an actual test you will see a different set of questions.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- Current
- Review
- Answered
- Correct
- Incorrect – Reference:
- Question 1 of 9
1. Question
Explain how the value of prospective fault current (Ipf) is determined following Prospective Earth Fault Current (PEFC) and Prospective Short Circuit Current (PSCC) tests (QID: 30017)
-
Your answer will be displayed alongside the model answer once you use check button.
Model Answer:Model Answer: -
- Question 2 of 9
2. Question
State three items of information which should be included on the circuit charts and schedules made available to the inspector (QID: 30020)
-
Your answer will be displayed alongside the model answer once you use check button.
Model Answer:Model Answer: -
- Question 3 of 9
3. Question
When testing must take place for protection by barriers or enclosures, what degree of protection would be required (QID: 30054)
-
Your answer will be displayed alongside the model answer once you use check button.
Model Answer:Model Answer: -
- Question 4 of 9
4. Question
Determine the maximum theoretical value of earth electrode resistance for 100mA RCD protection on a construction site. (QID: 30086)
-
Your answer will be displayed alongside the model answer once you use check button.
Model Answer:Model Answer: -
- Question 5 of 9
5. Question
State the IP codes that must be adhered to for a consumer unit (QID: 30174)
-
Your answer will be displayed alongside the model answer once you use check button.
Model Answer:Model Answer: -
- Question 6 of 9
6. Question
Why is it important to carry out inspection and testing during the erection stage of an installation? (QID: 30188)
-
Your answer will be displayed alongside the model answer once you use check button.
Model Answer:Model Answer: -
- Question 7 of 9
7. Question
What is the responsibility of the inspector during the initial inspection? (QID: 30189)
-
Your answer will be displayed alongside the model answer once you use check button.
Model Answer:Model Answer: -
- Question 8 of 9
8. Question
Name the documentation to be issued following initial verification (QID: 30191)
-
Your answer will be displayed alongside the model answer once you use check button.
Model Answer:Model Answer: -
- Question 9 of 9
9. Question
Explain the main reason for disconnecting one end of a main protective bonding conductor when carrying out continuity. (QID: 30257)
-
Your answer will be displayed alongside the model answer once you use check button.
Model Answer:Model Answer: -
Test Summary
0 of 20 Questions completed
Questions:
Information
You have already completed the test before. Hence you can not start it again.
Test is loading…
You must sign in or sign up to start the test.
You must first complete the following:
Results
Results
0 of 20 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
| Average score | |
| Your score | |
Categories
- Methods of compliance with the six parts of the Building Regulations most relevant to electrical installation in dwellings 0%
- The general requirements of the Building Regulations in relation to electrial installations in dwellings 0%
-
————————————————————–
Thank you for taking a look at this Electacourse Practice Test. There are many more questions in the actual practice tests we have available. For instance the 18th Edition Online Course contains over 1,000 questions. Each time you take an actual test you will see a different set of questions.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- Current
- Review
- Answered
- Correct
- Incorrect – Reference:
- Question 1 of 20
1. Question
Category: The general requirements of the Building Regulations in relation to electrial installations in dwellingsWhen considering safety in the workplace, responsibility lies with? (QID: 3445)
CorrectIncorrect – Reference: - Question 2 of 20
2. Question
Category: The general requirements of the Building Regulations in relation to electrial installations in dwellingsThe load that a new circuit is using can conveniently be worked out by using? (QID: 3470)
CorrectIncorrect – Reference: - Question 3 of 20
3. Question
Category: The general requirements of the Building Regulations in relation to electrial installations in dwellingsExtending an existing ring circuit in a garage attached to a dwelling would be considered as? (QID: 3749)
CorrectIncorrect – Reference: - Question 4 of 20
4. Question
Category: The general requirements of the Building Regulations in relation to electrial installations in dwellingsAn approved document would provide guidance on? (QID: 3776)
CorrectIncorrect – Reference: - Question 5 of 20
5. Question
Category: The general requirements of the Building Regulations in relation to electrial installations in dwellingsHorizontal chases in walls should be no thicker than? (QID: 3805)
CorrectIncorrect – Reference: - Question 6 of 20
6. Question
Category: The general requirements of the Building Regulations in relation to electrial installations in dwellingsTo which of these areas does the prevention of excessive reverberation not necessarily apply? (QID: 3845)
CorrectIncorrect – Reference: - Question 7 of 20
7. Question
Category: The general requirements of the Building Regulations in relation to electrial installations in dwellingsWhat is the maximum height at which an entry phone should be installed? (QID: 3870)
CorrectIncorrect – Reference: - Question 8 of 20
8. Question
Category: The general requirements of the Building Regulations in relation to electrial installations in dwellingsWhich Act or Regulation applies generally to construction work, whether notifiable or not? (QID: 11128)
CorrectIncorrect – Reference: - Question 9 of 20
9. Question
Category: The general requirements of the Building Regulations in relation to electrial installations in dwellingsVertical chases in a wall should be no deeper than? (QID: 11237)
CorrectIncorrect – Reference: - Question 10 of 20
10. Question
Category: Methods of compliance with the six parts of the Building Regulations most relevant to electrical installation in dwellingsWhen considering installing twin and cpc cable in an area that has a high potential of mechanical damage, the cable should? (QID: 3466)
CorrectIncorrect – Reference: - Question 11 of 20
11. Question
Category: Methods of compliance with the six parts of the Building Regulations most relevant to electrical installation in dwellingsThe number of socket outlets that can be installed on a standard BS1363 ring final circuit is? (QID: 3516)
CorrectIncorrect – Reference: - Question 12 of 20
12. Question
Category: Methods of compliance with the six parts of the Building Regulations most relevant to electrical installation in dwellingsAn electrical installation should be tested, inspected and certified by? (QID: 3552)
CorrectIncorrect – Reference: - Question 13 of 20
13. Question
Category: Methods of compliance with the six parts of the Building Regulations most relevant to electrical installation in dwellingsIt is most important that test instruments are? (QID: 3576)
CorrectIncorrect – Reference: - Question 14 of 20
14. Question
Category: Methods of compliance with the six parts of the Building Regulations most relevant to electrical installation in dwellingsThe connection between the main earthing terminal and exposed conductive parts is known as? (QID: 3654)
CorrectIncorrect – Reference: - Question 15 of 20
15. Question
Category: Methods of compliance with the six parts of the Building Regulations most relevant to electrical installation in dwellingsWhere a new 10kW shower circuit is required, but the consumer unit cannot accommodate, a solution would be to? (QID: 3686)
CorrectIncorrect – Reference: - Question 16 of 20
16. Question
Category: Methods of compliance with the six parts of the Building Regulations most relevant to electrical installation in dwellingsWhat is the minimum supply information which the electricity is obliged to provide without specfic request? (QID: 11152)
CorrectIncorrect – Reference: - Question 17 of 20
17. Question
Category: Methods of compliance with the six parts of the Building Regulations most relevant to electrical installation in dwellingsWhen undertaking a dead test, which test immediately precedes a polarity test? (QID: 11184)
CorrectIncorrect – Reference: - Question 18 of 20
18. Question
Category: Methods of compliance with the six parts of the Building Regulations most relevant to electrical installation in dwellingsWhat is the cable rating for 70 °C thermoplastic insulated and sheathed flat 1.5 mm2 cables with protective conductor using reference method C? (QID: 11202)
CorrectIncorrect – Reference: - Question 19 of 20
19. Question
Category: Methods of compliance with the six parts of the Building Regulations most relevant to electrical installation in dwellingsWhen undertaking an IR test on a circuit up to 500 V (excluding SELV and PELV), what is the minimum insulation resistance? (QID: 11218)
CorrectIncorrect – Reference: - Question 20 of 20
20. Question
Category: Methods of compliance with the six parts of the Building Regulations most relevant to electrical installation in dwellingsWhat is the minimum intermittent extract ventilation fan rate for sanitary accommodation (not part of a bathroom)? (QID: 11253)
CorrectIncorrect – Reference:
Demo – Online Practice: 2365-Level 2
Test Summary
0 of 40 Questions completed
Questions:
Information
You have already completed the test before. Hence you can not start it again.
Test is loading…
You must sign in or sign up to start the test.
You must first complete the following:
Results
Results
0 of 40 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
- Not categorized 0%
- Not categorized 0%
- Appendices 0%
- Assessment of general characteristics 0%
- Definitions 0%
- Protection for safety 0%
- Scenario 103 0%
- Scenario 104 0%
- Scenario 105 0%
- Scenario 108 0%
- Scenario 109 0%
- Selection and erection of equipment 0%
- Special Installations or Locations 0%
- Understand safety management procedures when undertaking inspection and testing 0%
- Understand the requirements for inspection and testing 0%
- Understand the requirements for testing electrical installations 0%
- Understand the requirements for the inspection of electrical installations 0%
-
————————————————————–
Thank you for taking a look at this Electacourse Practice Test. There are many more questions in the actual practice tests we have available. For instance the 18th Edition Online Course contains over 1,000 questions. Each time you take an actual test you will see a different set of questions.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- Current
- Review
- Answered
- Correct
- Incorrect – Reference:
Demo – Online Practice: 2377-22 PAT Testing
Test Summary
0 of 48 Questions completed
Questions:
Information
You have already completed the test before. Hence you can not start it again.
Test is loading…
You must sign in or sign up to start the test.
You must first complete the following:
Results
Results
0 of 48 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Understand equipment construction and classification 0%
- Understand how to carry out combined inspection and testing 0%
- Understand in-service inspection and testing procedures 0%
- Understand information contained in documentation 0%
- Understand statutory and non statutory requirements 0%
- Understand the electrical units of measurement 0%
-
————————————————————–
Thank you for taking a look at this Electacourse Practice Test. There are many more questions in the actual practice tests we have available. For instance the 18th Edition Online Course contains over 1,000 questions. Each time you take an actual test you will see a different set of questions.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- Current
- Review
- Answered
- Correct
- Incorrect – Reference:
