Tag: 2391

Posted on by

2391 Inspection and Testing is back!

But what about 2394/2395?

Do not be alarmed if you already have the 2394/2395 qualifications or if you are still studying for them. These qualifications continue alongside the new 2391 and will be taught and examined up to August 2018; and of course the 2394 and 2395 qualifications will continue to be recognised by industry and employers.

The 2394 and 2395 qualifications have acquired a deserved reputation as high quality evidence of advanced electrical verification, inspection and testing skills. That said, many will agree that the examination method for 2394 and 2395 has not been easy or efficient – quarterly written exams with hard-to-schedule resits is costly and time-consuming for examination centres and for candidates. We don’t know if this is the reason behind the change, but we are sure it must have been taken into account by City & Guilds when taking the decision to introduce the new 2391 qualification.

The new 2391 qualifications

The new inspection and testing qualifications are to be known as 2391-50, 2391-51 and 2391-52. Each qualification will be assessed by a multiple choice eVolve exam and an assignment including a practical assessment and a short written paper exam.

The qualifications are active from now, June 2017; training centres and FE colleges will soon have them available for study. Electacourse are have commissioning expert tutors to write material for 2391-50, 2391-51 and 2391-52. We have a range of material for:

  • Electricians and other candidates planning to take the qualification, or
  • Training centres and colleges who require classroom and teaching material 

Full range of material here.

2391-50 Level 3 Award in Initial Verification

This qualification is aimed at domestic installers. Currently domestic installers have no formal requirement for initial verification. This award addresses this omission in skills and qualification. Assessed by a 40 question multiple choice test and two practical assignments involving verification skills on a test rig and a short written paper exam.

2391-51 Level 3 Award in Periodic Inspection & Testing

This award is designed for completing apprentices and engineers who need only periodic assessment. For apprentices and engineers who have completed the 2357 apprenticeship and will have been assessed on Initial Verification, it is not required for them to be assessed again. Assessed by a 40 question multiple choice test and three practical assignments involving visual photo exercise, inspection skills on a test rig and a short written paper exam.

2391-52 Level 3 Award in Inspection & Testing

This qualification is for practising electricians who want both disciplines – periodic and initial. Assessed by a 60 question multiple choice test and three practical assignments involving visual photo exercise, inspection skills on a test rig and a short written paper exam.

The 2391-52 is a combination of both 2391-50 and 2391-51. You do not need to do all three qualifications. Most people seem to be planning on doing the combined 2391-52.

Full range of 2391 training and support material >

 

Posted on by

Exam Technique for electricians

If you have read our previous post on preparing for an exam then you will know that a lot of work goes in to making sure that you are ready for your big exam. So with so much effort under your belt, it would seem silly to fall at the final hurdle.

Let us show you some of the key exam day techniques to help you to get even closer to your goals.

Getting Ready

After a good night’s sleep you should be up and ready to head to your local exam centre. You will want to leave home with plenty of time and ensure that you have planned your route out.

You will not be allowed in to the exam if you are late and if you get there just in time then you are more likely to feel flustered and stressed as you enter the room.

You should also make sure you have all the right equipment with you in order to complete the exam and always, always take a spare pen or two.

Give yourself up a timetable

When the time comes to opening those papers there is a good chance you are going to feel some panic about what you may find. Just keep calm and work out in your head a timetable of how long to give each question (although this may already be set out for you).

You should try to plan in 10 minutes at the end of the test for proof-reading.

Reading through the questions

Make sure that you read each and every question accurately, take the time to make sure you understand each point as candidates are more likely to lose marks simply because they haven’t read the questions properly. Read each one twice, three times if you have to.

Underline or mark anything that you feel is important in the question and ensure that you can see what is meant by each phrase or point.

Keep Calm

There is a good chance that at some point in the exam you are going to draw a blank. When this happens, just take a deep breath, compose yourself and think back to all that revision, it will soon come back to you.

Remember, exams are supposed to test you, otherwise they wouldn’t be exams, so don’t worry if you have to really think about the answer.

If you are really struggling, then try answering all the questions that you are sure of. This will not only give your brain a rest but also boost your confidence as it shows you everything you do know.

Answering the questions

Always make it clear which question you are answering, you should also use correct and up to date terminology, after all this is professional exam. The examiner who marks your answers will not assume anything, so make sure you make every point you know clearly.

Also, don’t forget to use your best handwriting, if the examiner cannot understand what you have written then they won’t be able to mark it for you.

Plan each answer before you put it on the paper and make sure that you are understanding what is being asked of you.

Check and check again

As we have already said, try to leave yourself around 10 minutes towards the end of the exam to check over your work.

During this time, you should:

  • Make sure you have answered all the questions
  • Ensure that you have answered questions as precisely and thoroughly as you can
  • Make sure that you have outlined your workings out if it is a maths questions
  • Check that you have used all the relevant terminology

Once you have done all this you should have a completed test in front of you. Try to relax and not worry about what you have written. Now is the time just to wait for your results and see whether or not you have qualified.

 

 

Posted on by

How to prepare for your City & Guilds electrical qualification exams

Exams are a nerve wracking time for anyone; not least of all for those who are relying on passing to help their career. This is particularly true for electricians who will need to ensure they have the relevant qualifications in order to provide customers with a service.

Here at Electacourse we have put together some top tips for exam preparation, meaning that no matter how important the exam is, you will find ready to face it.

Reduce your stress

It is normal to feel stressed as a big exam loom on the horizon. This can come in both physical and mental forms and whilst stress is normal, you should try to reduce how much it affects you.

Physical stress can be reduced in the lead up to an exam by making sure that you keep up a positive fitness and eating plan. Not only this, but in the week or so before the exam it is important to make sure that you get enough sleep, otherwise you may underperform due to tiredness when it really matters.

Mental stress can be a little trickier to combat. Fear is a huge part of stressful feelings, especially fear of what questions you may face and whether you will be able to answer them. One of the best ways you can combat these feelings is by sourcing question and answer practice books and guidance notes. These are designed to give you a feel for the types of questions you can expect and give you the confidence to face them on the day.

Never over-study

The temptation may be to cram as much information as you can into your head before an exam; however over-studying can be a dangerous game. Instead of filling your brain up with useful information, over-studying can lead to tiredness and stress.

Instead you should balance your studying with plenty of breaks, if you are struggling to understand something, once you leave it for 10 minutes you might find it becomes all the clearer in your mind.

Set a revision schedule

Preparation is key in so many aspects of life, especially exams. Make sure you draw yourself a revision schedule in the fortnight before your exam. Set out all the topics that you need to cover and slot them into realistic time scales. This means that you won’t be at risk of over-studying and that you can give yourself plenty of time to learn each different topic.

Don’t forget to plan in for your “normal life” too. There is a good chance that you will still have a job, family or other commitments and if this is the case then you should still make plenty of time for them too.

Pick the right study method

Everyone learns in different ways. Reading might be best for some, whilst others need to listen to the words in order to take them in. Identify the best way that you learn and stick to it. After all, there is no-one else sitting the exam in your place, so you might as well personalise it as much as you can.

So there you have it, some of the ways that you can be ready for your exam. Take a deep breath and remember that if you stay calm and believe in yourself and what you have studied, you will be surprised by what you can achieve.

Coming soon tips on how to make a success of the exam once you are at the exam centre.

Posted on by — Leave a comment

Home study advantages

The Advantages of Home Study

Home study, also known as distance learning is now an established part of education and training throughout the UK and other countries – in the US some of the largest training establishments are distance learning.

The quality of distance learning has greatly improved in the past few years, as both students and training companies have become more comfortable with the technology, and as stories of best practices have been shared and duplicated.

Electacourse have been involved in home study/distance learning for many years – both as a company and from individual members of staff. One of our senior colleagues has been in the field for 20 years and in the past was responsible for the management and education of over a million US university students – all learning whilst at home.

Home study features a number of advantages.

Advantages include:

  • Accessibility for those living away from a training centre
  • No waste of time or other resources in transport, commuting to a central location for each class
  • Flexibility to study in any convenient location with an Internet connection
  • Self-paced learning: Quickly browse materials you have already mastered, and concentrate time and effort in areas containing new information and / or skills
  • Study materials at a personal speed and intensity, without having to wait for slower pace of the average classroom
  • Just-in-time learning; more opportunities to study the most current material available
  • Flexibility for those with irregular work schedules
  • Accessibility for those with restricted mobility
  • Accessibility for those with family responsibilities
  • Communication with other students (not yet a facility on Electacourse, but one we are planning to introduce)

Recent research has shown that the most significant factor helping students to succeed has been their ability to manage time. The more successful students reported spending time regularly studying and not leaving it until the last minute.

For the 17th Edition Course which concludes with the 2382-15 exam (rated by City & Guilds as requiring 35 hours of study), Electacourse recommend you are regularly achieving high scores with the exam simulator before putting yourself up for the exam.

Posted on by — Leave a comment

How to become an electrician in the UK

The electrical industry in the UK has recognised formal qualifications that provide a clear qualification route for an electrician whether or not they are a new entrant, already experienced or have overseas qualifications.

Introduction

Electacourse strongly recommend you contact electrotechnical industry bodies and organisations to confirm the qualifications required for becoming an electrician in the UK (link below) for the work which you plan to undertake, but the Electacourse summary understanding of the process of becoming qualified to work as an electrician in the UK is:

All people who are working unsupervised as a fully qualified electrician in the electrotechnical sector need to be qualified to the level of the industry-recognised NVQ level 3 qualifications. How you get to this level is dependent on your status.

For people who want to work only on domestic electrical installations, there is a lower threshold alternative of becoming registered on a self-certification scheme (run by Elecsa, Benchmark and others) who may be able to undertake and self-certify their work on domestic installations. See below the information about Part P and qualifying as a domestic installer.

Fully Qualified Electrician

To become a fully qualified electrician able to do industrial, commercial and not just domestic work, the following are the routes to qualification:

  1. For all new entrants to become recognised as an electrician, the Level 3 NVQ Diploma in Installing Electrotechnical systems and equipment (building structures and the environment) is required. This diploma can be obtained by undertaking study either with or without employer sponsorship at Further Education colleges or private training providers. By the nature of the practical requirement of some parts of electrical training, it is not possible to undertake all elements of this qualification by self-study alone.
  2. For individuals who have some previous experience whether in the UK or elsewhere, they need an interview with an assessor to develop an individual assessment plan without necessarily the need to go back to college to train in the classroom, (see AM2 on electricalqualifications.com).The AM2 assessment is administered by NET (http://netservices.org.uk/). We recommend that even if you have no electrical installation employment experience but have completed a college course, you seek advice from NET on final qualification requirements. AM2 is normally part of NVQ Diplomas.
  3. If you are already qualified in another country, then for some countries there are special arrangements where equivalence between electrical qualifications has been established, the following website has more information – http://summitskillsframework.naric.org.uk/index.asp?file=introduction

Domestic Electrical Installer

Domestic Installer Part P Courses available from some providers are designed to prepare candidates for the self-certification scheme Part P Assessment. On successful completion of a Part P Assessment, electricians are qualified to self-certify their own electrical work on domestic installations.

Electacourse Courses

Electacourse publish the 18th Edition Course provides everything required to achieve the 18th Edition Wiring Regulations qualification as assessed by the City & Guilds 2382-158examination. This is an essential qualification for all UK electricians. It is also a general requirement (but not necessarily obligatory) for Domestic Installers. Optionally this course includes the City & Guilds 2382-18 18th Edition exam, we have partner examination centres throughout the UK.

Most of the other material which we publish at Electacourse is designed as preparation and revision material for the various City and Guilds examinations and are used by people who are taking these exams as part of their route to qualification and professional improvement as electricians.

We have courses and exam practice simulators which cover

On our website you will find links to our courses and to trade bodies and organisations which can provide complete information about becoming an electrician in the UK.  You may also find the information on http://www.electricalqualifications.com useful.  On this site you will also find information about transferring your home country qualifications to UK qualifications.