Posted on 14 Comments

How to become a PAT Tester

What is PAT Testing?

Portable Appliance Testing is a valuable skill for electricians and others involved in ensuring electrical equipment is maintained in a safe condition. Becoming a PAT Tester offers electricians, facilities managers and everyone looking for a new  business opportunity to take advantage of the PAT Testing requirements.

New Electacourse Online PAT Testing Course

From just £40, study the Electacourse Online PAT Testing Course to gain the skills and knowledge to enable you to understand the requirements of being a PAT Tester.

PAT Testing Introduction

According to The Health & Safety Executive, around 25% of all reportable electrical accidents involve portable appliances. The Electricity at Work Regulations place a legal responsibility on employers, employees and self-employed persons to comply with the provisions of the Electricity at Work regulations and take all reasonable steps to ensure that no danger arises from the use of such equipment. Thus, in effect, a systematic and regular program of maintenance, inspection and testing is required. The Health & Safety at Work Act (1974) places this obligation in the following circumstances:

  • Where portable appliances are used by employees.
  • Where the public may use portable appliances in establishments such as schools, hospitals, shops and hotels etc.
  • Where appliances are repaired or serviced.
  • Where appliances are supplied or hired.

The level of inspection and testing requirement depends upon the level of risk of the portable appliance becoming faulty, which is in turn dependant upon the type of portable appliance, the nature of its use and the environment in which the appliance is used.

The publication the Code of Practice for In-service Inspection and Testing of Electrical Equipment published by The Institution of Electrical Engineers (the IEE) is a guide that forms the basis for portable appliance testing (PAT) in the U.K.

Legal Requirements

The legislation that is relevant to portable appliance testing include the Health & Safety at Work Act 1974, the Electricity at Work Regulations 1989, the Management of Health & Safety at Work Regulations 1999, the Workplace (Health, Safety and Welfare) Regulations 1992 and the Provision and Use of Work Equipment Regulations 1998.

The Health & Safety at Work Act 1974 puts the duty of care upon both the employee and the employer to ensure the safety of all persons on the work premises. This also applies to the self employed.

Specifically, the ‘Provision and Use of Work Equipment Regulations 1998’ states that:

“Every employer shall ensure that work equipment is maintained in an efficient state, in efficient working order and in good repair.”

This is just one example of one piece of legislation relevant to PAT testing and it is clear that there is a legal requirement to inspect and test all types of electrical equipment in all work situations.

What next?

This page has given you a brief introduction to PAT Testing. You do not need to be a qualified electrician to be a PAT Tester, but it does form part of many electricians work portfolio. To become a PAT Tester you have a number of possibilities:

  1. Take a PAT Testing Course with a commercial or FE College training provider. They can offer the full package (course plus 2377-22) in one go – but often at a high price
  2. Study on your own with the great value  Electacourse Online PAT Testing Course –  from only £40, together with the IET Code of Practice. This option is recommended if you already have some electrical experience and you have the opportunity to improve your practice skills. If you like, you can follow this up with the City & Guilds 2377-22 exam which you can find offered in many locations
  3. Remember you will need to purchase PAT Testing equipment. Some equipment companies offer a ‘PAT Testing Business in a Box’ – these include all you need to start up a PAT Testing business.
Posted on

Electacourse Affiliate Programme

When you promote our products on your site, your visitors will have access to top quality courses and training material from an industry leader and a brand they trust.

Earn Commission

As an Electacourse affiliate, you earn with every qualifying sale your site refers. Better placement of ads leads to increased sales on electacourse.com meaning you earn more money

Fast and Easy

Electacourse will provide you with all the tools necessary to make money with the Electacourse affiliate programme. Simply place the banners and logos we can provide at your request on your site and we will manage the order, course registration, product download and billing. All you do is sit back and receive payment.

Monitor Your Success

Online reporting is offered through the Electacourse website allowing you to track the real-time effectiveness of your affiliate site

It’s Free

Joining the Electacourse affiliate programme costs you nothing. No hidden fees. No follow-up charges

Join Now

Go to Electacourse.com/affiliate-area to sign up

Posted on

Exam Technique for electricians

If you have read our previous post on preparing for an exam then you will know that a lot of work goes in to making sure that you are ready for your big exam. So with so much effort under your belt, it would seem silly to fall at the final hurdle.

Let us show you some of the key exam day techniques to help you to get even closer to your goals.

Getting Ready

After a good night’s sleep you should be up and ready to head to your local exam centre. You will want to leave home with plenty of time and ensure that you have planned your route out.

You will not be allowed in to the exam if you are late and if you get there just in time then you are more likely to feel flustered and stressed as you enter the room.

You should also make sure you have all the right equipment with you in order to complete the exam and always, always take a spare pen or two.

Give yourself up a timetable

When the time comes to opening those papers there is a good chance you are going to feel some panic about what you may find. Just keep calm and work out in your head a timetable of how long to give each question (although this may already be set out for you).

You should try to plan in 10 minutes at the end of the test for proof-reading.

Reading through the questions

Make sure that you read each and every question accurately, take the time to make sure you understand each point as candidates are more likely to lose marks simply because they haven’t read the questions properly. Read each one twice, three times if you have to.

Underline or mark anything that you feel is important in the question and ensure that you can see what is meant by each phrase or point.

Keep Calm

There is a good chance that at some point in the exam you are going to draw a blank. When this happens, just take a deep breath, compose yourself and think back to all that revision, it will soon come back to you.

Remember, exams are supposed to test you, otherwise they wouldn’t be exams, so don’t worry if you have to really think about the answer.

If you are really struggling, then try answering all the questions that you are sure of. This will not only give your brain a rest but also boost your confidence as it shows you everything you do know.

Answering the questions

Always make it clear which question you are answering, you should also use correct and up to date terminology, after all this is professional exam. The examiner who marks your answers will not assume anything, so make sure you make every point you know clearly.

Also, don’t forget to use your best handwriting, if the examiner cannot understand what you have written then they won’t be able to mark it for you.

Plan each answer before you put it on the paper and make sure that you are understanding what is being asked of you.

Check and check again

As we have already said, try to leave yourself around 10 minutes towards the end of the exam to check over your work.

During this time, you should:

  • Make sure you have answered all the questions
  • Ensure that you have answered questions as precisely and thoroughly as you can
  • Make sure that you have outlined your workings out if it is a maths questions
  • Check that you have used all the relevant terminology

Once you have done all this you should have a completed test in front of you. Try to relax and not worry about what you have written. Now is the time just to wait for your results and see whether or not you have qualified.

 

 

Posted on Leave a comment

Home study advantages

The Advantages of Home Study

Home study, also known as distance learning is now an established part of education and training throughout the UK and other countries – in the US some of the largest training establishments are distance learning.

The quality of distance learning has greatly improved in the past few years, as both students and training companies have become more comfortable with the technology, and as stories of best practices have been shared and duplicated.

Electacourse have been involved in home study/distance learning for many years – both as a company and from individual members of staff. One of our senior colleagues has been in the field for 20 years and in the past was responsible for the management and education of over a million US university students – all learning whilst at home.

Home study features a number of advantages.

Advantages include:

  • Accessibility for those living away from a training centre
  • No waste of time or other resources in transport, commuting to a central location for each class
  • Flexibility to study in any convenient location with an Internet connection
  • Self-paced learning: Quickly browse materials you have already mastered, and concentrate time and effort in areas containing new information and / or skills
  • Study materials at a personal speed and intensity, without having to wait for slower pace of the average classroom
  • Just-in-time learning; more opportunities to study the most current material available
  • Flexibility for those with irregular work schedules
  • Accessibility for those with restricted mobility
  • Accessibility for those with family responsibilities
  • Communication with other students (not yet a facility on Electacourse, but one we are planning to introduce)

Recent research has shown that the most significant factor helping students to succeed has been their ability to manage time. The more successful students reported spending time regularly studying and not leaving it until the last minute.

For the 17th Edition Course which concludes with the 2382-15 exam (rated by City & Guilds as requiring 35 hours of study), Electacourse recommend you are regularly achieving high scores with the exam simulator before putting yourself up for the exam.